How To Add Camera Reolink Device
How to Add Reolink Products in LAN via Reolink Customer(New Client )
Applies to: All Reolink Cameras and NVRs
When your cameras or NVRs are on the same LAN equally your PC, you may add them via Reolink Client easily referring to the following methods.
Method i. Automatically Add together
- If you have enabled the Add Device Automatically option under the local setting of the client, and the camera apply the default mill password( bare countersign), it will automatically show up on the client list and you can directly alive view this camera.
- If you have enabled the Add together Device Automatically option nether the local setting of the client, and yous have set a password for it via other devices, it will besides automatically show up on the client list, only it will besides evidence an Incorrect Countersign fault.
Delight follow the image beneath to enter the photographic camera's password, then you will be able to meet the alive stream.
Method 2. Scan Device in LAN
Choose Add Device ->Scan Device in LAN to scan your Reolink device(due south).
The cameras in the same local network volition automatically testify upwards, click the + button to add together it.
If information technology is an Incorrect Password error, delight click the left " edit" button to enter the camera's password, then you will able to run across the live stream.
Method 3. Manually add via IP/Domain
If you know your camera's IP address, delight follow the steps beneath to add this camera and enter the password of your photographic camera, then you will able to encounter live stream
Annotation: yous can observe the IP address of your camera while scanning in LAN or in your router interface.
Method 4. Manually add via UID
Usually, in the aforementioned local network, it'southward suggested to add the device to the client via the above three methods, but for the battery-powered cameras, even connecting the aforementioned local network, delight add to the client via UID rather than IP address.
Refer to how to find the camera's UID
Delight click + button, choose UID, enter your camera's UID, then click on Add to enter your camera'south password.
Then you lot will able to encounter a live stream via the pc customer.
Related articles
- How to Enable/Disable Add Device Automatically via Reolink Client (New Client)
- How to Add together Cameras or NVRs to Reolink Customer past Manually Inbound IP (New Client)
- How to Notice the UID of Your Device
- How to Upgrade Firmware via Reolink Customer (New Client)
- How to Playback/Download/Cutting Recordings via Reolink Client (New Customer)
Source: https://support.reolink.com/hc/en-us/articles/900003548586-How-to-Add-Reolink-Products-in-LAN-via-Reolink-Client-New-Client-
Posted by: warnersittort.blogspot.com
0 Response to "How To Add Camera Reolink Device"
Post a Comment